Punch safety rules
Published：2014/6/3 11:49:53 Hits：2315
1 - General
1.1 Punch workers must learn to master the structure , equipment performance , familiar with the operating procedures and obtain permission before they operate independently.
1.2 on the proper use of safety equipment protection and control devices shall be arbitrarily dismantled .
1.3 conscientiously study the security system , and keep the workplace clean and smooth .
2 Precautions Before
2.1 according to the types of labor protection provisions dressed .
2.2 Check the machine for each transmission, connection , lubrication and other parts and protective safety devices are working properly , the screws must be securely mounted mold not move .
2.3 Machine work should be empty before running for 2-3 minutes , flexibility, check hand (foot ) gates and other control devices , before use to confirm normal operation shall not be sick .
3 work which Precautions
3.1 Mold bear firmly on the lower die on the positive, to ensure the correct position, turn the machine by hand to move the test red ( empty ) , ensure the mold is in good circumstances .
3.2 lubricated before driving to pay attention , take everything out of bed and put the items float plane .
3.3 punch to take action or punching operation , the operator stands to be appropriate , the hands and the head should be kept a certain distance from the punch, punch and always pay attention to the action , chat with others is prohibited .
3.4 short punching system or rustic artifacts , application-specific tools may not be directly fed by hand or pickup.
3.5 or humble when punching system long body parts , the security system should be set up to take care rack or other safety measures to avoid digging injuries.
3.6 punch even have to have automatic feeding guards or other protective measures overshoot.
3.7 single punch , hands and feet are not allowed on the hand , the foot brake must be washed once a move ( step ) look to prevent accidents.
3.8 When two or more co- operation, is responsible for moving ( riding ) gates , must pay attention to feeding people s movements, non- side pickup, side move ( step ) gates .
3.9 full use protective devices , running red top even allowed to touch the moving parts , transmission parts telekinesis prohibited materials .
3.10 machine failure, maintenance personnel inspect repairs should be looking not disassemble .
3.11 work under the following circumstances should one stop or pull down the power supply:
3.11.1 work intermittent , temporary power outages and when leaving work ;
3.11.2 lubrication, repairs each time cleaning machine ;
3.11.3 adjustment device when the cards mold , take transport the workpiece and punch mold found there when loosening anomalies ;
4 After working Precautions
4.1 At the end of the work stop in time , cut off the power , clean the machine , finishing environment.
4.2 earnestly implement the shift system .
Interaction Center